Quote:
Originally Posted by 4_cell_racer
Managed to snaffle myself a x2te and wanted to know how you guys fill the shocks as they don't have bladders in the cap!
Also don't any other make of big bore springs fit these shocks?
Cheers
Lee
|
1. Fill the shock until the oil is level with the top of the shock body.
2. Push the shaft/piston to the desired rebound point. This will make a curve in the oil )
3.
Slowly screw the cap on the oil will bleed out the side (look for the slot in the thread) 95% of the way down.
4. Wait until you know all the excess oil has bled out then fully tighten.
I hear the new Losi springs fit however I use the Team C springs they are very good.