Trish's 22
It appears I have broken the mould by not modifying the original design. Everything is as per the mid motor build apart from the following;
Green on Front, White Springs Rear
30W Front 25W Rear
The rear upper linkage is running on the innermost and rear most hub position with 2mm under the ball cup and no spacers on the inner.
No weights are added
I run, brushed (shock horror) 23t with an MTroniks StormX (low profile esc). I use saddle packs, Spectrum S6040 servo and a 40MHz RX. I run this indoors.
Worried if a 10t will overheat in the limited amount of cooling when I go outdoors.
Sorry for the poor pictures and I hadn't clipped the body on, and the silly road tyres.
Trish
|