here my setup
Here my setup
Sorry but setup sheet is to big for upload.
Med traction, slick dirt, flat, less bumps
Rear tower, drilled 4th hole
1° Rear c hubs in reverse (2° total - std is 3°)
camber link: tower inside up, c-hub inside no shim
rear arm mount inside
long wheelbase with std chassis
20g brass weight in rear plastic brace (drilled holes for mounting)
Shock oil: 150 Asnmann
Spring: Big Bore Soft
white pistons big bore
Camber -0,5°
Tyres: PL Bow tie M3 with 2 Stage
front
Caster 25° std
bump steer 2 shims outside
Toe in: 0°
Shock oil: 200 Ansmann
Spring: Big Bore Hard
black pistons big bore
Camber: -1,5°
Tyres: Groovy super Soft
Camber link (inside inside with 2 shims, outside (caster hub: inside)
shock position tower: inside
shock position front arm: outside
Motor: Xirius brushless 6,5
ESC: Xirius Pro brushless
86/22
with all titanim screws lunsford and boca full ceramic bearings
bfast diff
car weight: 1500 g
|