Quote:
Originally Posted by jkclifford
Uneven tyre where could be your set up, or the way you drive.
|
setup is as kit suggsests with 35wt in front and 30wt in back. diffoils are 7k / 5k. all on astro, any problem with that?
im trying to drive as smooth as i can, i still need to get used to the car.
Quote:
Originally Posted by jkclifford
Poping ball joints is a known problem I belive losi ball cups with hpi studs is the favoured upgrade.
|
I found a hotfix today i used electrical tape under the ballstuds just a little peace. It puts a bit of binding into the suspention but the seem to fit better and there is less play. sofar i havent popped one. but i guess ill eventually upgrade to diffrent ball cups/studs.
Quote:
Originally Posted by jkclifford
Servo saver was probably too tight, change to ally parts break the horn or strip the gears.
|
Servo saver was set up as the manual suggsetet. as said i quickly switched to the tersey horn and i havent had a problem since, but i guesse the servo horn will be the next thing to break.
Quote:
Originally Posted by jkclifford
Spur gear wobble is fine, escentric movement is not!!
|
hmm i guess il have to get a replacement then...