Quote:
Originally Posted by DCM
Will post a full setup, but from what I remember it is
Front
Shock loc 2-middle
30wt, 55 - hole, red spring
line 2 (0.75mm washer) kit outer.
Rake 25' caster blocks 10'
Rear
Shock loc 2-inner
30wt 54 - 6 hole kit spring
4.5 HRC
1' anti-squat
camber link 2-E
SWB on hub
7.5 motor, linear profile on esc
diff loose, slipper slips 2ft
Cells turned 90' and moved rear
weight under cells and motor
Full wing
Stagger yellows and yellow minispikes on the rear.
|
Front
change caster to 3 or 5 degree blocks
put a 2mm spacer on caster block ball stud
1mm on inner ball stud
blue or black front spring
Rear Link B2 no washers on hub 2mm on inner ball stud
yellow or pink rear spring
just try this at first before changing the shocks!
if not try my A1 setup that i ran!