My latest setup, few tweaks from last ones, my car has loads of forward traction, I wll always start with this setup and change things if needed from there.
Front Suspension
Toe: 0'
Ride Height: wishbones slightly above level
Camber: 2'
Castor: 5'
Kick Angle: 25'
Oil: 32.5w
Piston: 3 hole 1.45mm tapered
Spring: Green
Spindle Type: Kit
Shock Limiters: 2mm
Shock Location: 2-middle
Bump Steer: 0mm
Camber Link: 1 - 2mm washers on tower, 0mm washers on hub
Rear Suspension
Chassis Configuration: Mid
Toe: 4'
Anti Squat: 1'
Roll Center: LRC
Ride Height: Driveshafts Level
Camber: 3'
Wheel Base: Long
Oil: 32.5w
Piston: 3 hole 1.55mm tapered
Spring: Orange
Shock Limiters: 0mm
Camber Link: 1-B (2mm under hub and tower ball joints)
Shock Locations: 2-inside
170g of brass under 96mm lipo and rear losi weight @50g
Front tyres: yellow staggers
Rear Tyres: yellow mini pins
Speed passion LPF
Ocra 6.5t motor
Savox slim servo
__________________
PR Racing - Insideline Racing - Zen Racing - GForce - PureRC - Puppy Paint
|