Quote:
Originally Posted by 4_cell_racer
Can someone point me in the direction of which screws/bolts I need to fit this part please?  |
Hi dude.
Just received mine through the post this morning and just fitted them.
You will need 4 m3 x 10mm screws which I pinched from my madrat spare car ( taken off shock tower). You will find the heads are too big as the 2 mounting holes are very close together. You can solve this by putting the bolt in a drill and set it to a low speed and use a grinder to make the head smaller. That way the head is even all round.
The upper camber link ball joint, you can use the same ball socket but you need a 3m lock nut ( 1 on each side to hold it firmly).
Finally, you will find the upper link is too long so I just used the same turnbuckle but removed the plastic ball joints and used stock madrat ball joints which are shorter.
Some pics to give you an idea..
