Quote:
Originally Posted by ray carey
Hi, i have just refitted my SP ESC with a new reciever. When first switched on it would accelerate straight away, but that was end points (sorted) now when i move throttle just a fraction it accelerates without any variable speed???? and i dont have reverse (program card is set as before). The speedo is a speed passion GT PRO 2.0 and the tranny is a etronix pulse, i would love some advice or help and please in simple terms, as i am still new to this, many thanks.  |
You mention end points... you shouldn't have to change the end points on the transmitter to set up the speedo.
Make sure the end-points are at 100%, make sure the throttle trim is in the middle, make sure all extra settings like exponential or ABS are off.
Set up the ESC by holding down the set button as you switch on (BEEP BEEP BEEP BEEP...), then pressing the button at neutral (BEEP), full throttle (BEEP BEEP) and full brake (BEEP BEEP BEEP). Then it is ready to use.
You might need to reverse the throttle on the transmitter if it won't set up properly.
This is all in the manual so it would be worth downloading a copy.