Is there a normal/offroad firmware? Like Speedpassion has separate stock and 'normal' firmware I would also like to have 'normal' firmware. I really deeply hate the advanced Timing and Boost thingies and I can't seem to get the timing shizzle off, it always feels a need to come in and give it an extra push.
I don't want a rocket on the straight or a sudden gain in speed.
Just a normal, smooth linear ESC, with good brakes.
I have tried multiple settings and I don't like any of them.
edit:
reading this:
http://www.teamtekin.com/hotwire_RS.html
Quote:
Timing Profile: This slider contains 5 preset Timing Profiles for your ESC. Setting any of the 5 preset profiles will automatically put your ESC into Sensored Only mode. Profiles 1-5 are as such:
TP1: Spec Stock "blink mode" 0*timing boost
TP2: 15* Timing Boost / RPM Range 5443-20,016
TP3: 25* Timing Boost / RPM Range 5443-20,016
TP4: 35* Timing Boost / RPM Range 5443-20,016
TP5: 45* Timing Boost / RPM Range 5443-20,016
*RPM Ranges are divided in half when running in 1S LiPO Mode*
You may notice that when any preset Timing Profile is in use, the Timing tab is inaccessible. This is because these presets are just that and are not allowed to be changed. To create your own unique setup, we have provided C1 and C2:
C1: Custom user profile, Timing Boost, Turbo, Turbo Delay, Turbo Ramp and RPM Ranges can all be custom set and saved to this profile.
C2: Same as C1.
*Factory Setting is C2*
Now, C1 and C2 are great for racers running multiple classes with the same chassis or ESC. With these custom profiles you are allowed to save them BOTH in the ESC for later use, as well as the 5 preset profiles. So say you have 17.5 spec, running TP1 "blinky" mode one heat and the next you run 13.5 Pro Stock with the C1 profile. This essentially allows your RS/RSPro to be 2 ESCs in one by simply switching between profiles while swapping motors!
|
I have to put my ESC in blinky mode ? 'tp1' ?
+ dual mode
please confirm or give additional 'how to'
