Setup below, this is how I ran it indoors, have tried it outdoors was great, just think it needs a bit more weight in it
Front Suspension
Toe: 0'
Ride Height: wishbones slightly above level
Camber: 2'
Castor: 10'
Kick Angle: 20'
Oil: 27.5w Losi (going to try 30w Losi oil)
Piston: 6 hole 1.3mm tapered
Spring: Green
Spindle Type: Kit
Shock Limiters: 2mm
Shock Location: 2-middle
Bump Steer: 0mm
Camber Link: 1 - 2mm washers on tower, 0mm washers on hub
Rear Suspension
Chassis Configuration: Mid
Toe: 4'
Anti Squat: 1'
Roll Center: HRC
Ride Height: Driveshafts Level
Camber: 3'
Wheel Base: Long
Oil: 32.5w Losi (going to try 35w Losi and red spring)
Piston: 6 hole 1.3mm tapered
Spring: Orange
Shock Limiters: 0mm
Camber Link: 1-B (2mm under hub and tower ball joints)
Shock Locations: 2-inside
62g under 96mm lipo (which is about the same as a pack of saddles) so effectivley no extra weight.
Front tyres: yellow staggers
Rear Tyres: yellow mini pins (medium insert)
Speed passion LPF
Ocra 5.5t motor
Savox slim servo
__________________
PR Racing - Insideline Racing - Zen Racing - GForce - PureRC - Puppy Paint
|