I have an original DEX410 that did not have the dragging slipper problem, but I bought a DEX410R for my oldest Son that did have the problem. To remedy this, I carefully removed a small amount of material from the bottom of the slipper cover/clamp, where it contacts the rear bearing. I did not need to remove material where it contacts the front bearing, only the rear.
The wobble you're experiencing could be a poorly machined front slipper plate, or the rear slipper outdrive. You can check it by removing the rear slipper outdrive (the part you circled in the image), and then place the slipper in the mount with the cover/clamp installed. Spin it while looking for wobble. If there is no wobble, the rear slipper outdrive could be bad. Contact TD. If it wobbles, contact TD for a front slipper plate replacement.
Let's stay on topic, please.
__________________
4PK, DEX408v2, DEX410 Pro, DESC410, DEX210v2 MOTOCROSS: Because Rollercoasters Are Too Slow!
|