If your going for a 22 and your dead set on getting one
Then wait till you have it before you get your pinion, there is a section in the manual that tells you which pinion to use for which turn of motor in order to get the best gear ratio.
I would recommend that you check the footprint of any speedo that you get and try to get it as small as possible, the Tekin RS is a good size for the 22 and a very good speedo as well.
saddles would probably be best as it is very tight inside the chassis alternatively there is a stubby stick that losi do that would fit as well.
Servo - low profile is your best bet as like I said its very tight on the chassis and space is at a premium.
|