Thread: B4 Vega Setup
View Single Post
  #24  
Old 16-05-2011
Scotty's Avatar
Scotty Scotty is offline
Member
 
Join Date: Aug 2010
Location: Oxfordshire
Posts: 66
Smile

After running on a local farely flat but more bumpy track on sunday, i ran the vega with silver springs front 35w AE 2 pistons and green springs rear 30w AE 1 pistons with FULL RUDEBITS weight kit ( 28g Servo, 92G Speedo and 62g Lipo ) with 1 anti squat. I found this settles the car alot more, ableing to drive into and around the corners alot harder and push on more. Tryed without under lipo weight found the car not settling well after jumps.
Running the wishbones just below level at the front with the driveshafts level at the back. It was a fairly high grip track so on the front running middle top and outter bottom with slim rims and stagger tyres and rear running middle top and inner bottom with yellow part worn spikes with meduim answer inserts.
__________________
Team C - Absima - Nemo Racing - Insideline Racing - Rudebits
Reply With Quote