[Yoc]

Originally Posted by dexter24

I think something might be wrong as i havnt got a 22t pinion so running 23/81 and the 9.5t motor is getting really hot and also cogging at low rpms using a Mamba Max ESC, whereas if i put my 6.5t motor in and use 23/81 ratio it gets warm but very little to almost no cogging........

The only problem I see here is the LRP Eraser motor. This is a very bad brushless motor. I used to have a brand new Nosram Dragon 10.5 (same motor as your LRP branded by Nosram) and it was so hot (was forced to let it become cold after a few running minutes) for so poor performances... I changed for a Feigao 6.5 and everything became cold ! And this was not a ratio problem.