View Single Post
  #7  
Old 14-05-2011
/tobys /tobys is offline
Mad Member
 
Join Date: Nov 2009
Location: Leicestershire
Posts: 1,370
Default

+1 for B4 roll bar kit. Also get yourself some of the roll bar fasteners from the Cougar SV - these allow you to mount the roll bar to the rear of the shock tower (so you don't need to cut a slot in the bulkhead) and they have a grub screw that allows you to set the "slop" so you can run different thickness roll bars easily. Think they are about £5 for 4 (you only need 2, so you either have spares or you can share with a friend).

Unless you reshape the wire, you may need to dremel the shock tower a bit to ensure the roll bar doesn't rub on it where the bend in the wire is.

HTH
Reply With Quote