[Cameo]

Originally Posted by StevieG

Hi All,

Had my Mad monkey running for a couple of weeks now with a 8.5 brushless. Can believe how good this car actually is for the money. Hopped up the usual shocks etc, but need some advice on the spur, found the kit one to be noisey so purchased an xpro, well very little difference.

Is there anything else that is quieter than will fit direct without replacing all the pads and plates?

Also looking to replace the diff balls with ceramic ones, any advice on if it is worth purchasing the xpro diff gear and can I remove the thrust washer (containing the thrust bearing balls) and replace with just ceramic balls (1.2mm) between the two plates, I cannot see why not as the B4 is the same.

Thanks in advance

I would have thought it was the same spur in the pro car. I would try a different pinion (borrow a buddies). Losi and Hotbodies share a similar design spur but you will need their pads

As for the diff that’s easy http://www.bfastrc.com/tqracing.html Get the Pro Drivers kit for the SX10 (that’s the US version of this car)

This fixes everything and makes the diff sooooo smooth it's amazing.