Well got some parts yesterday and builded a bit to day some parts are still missing but they are on its way.
Fitted the VZW-010 these are alu hexes with an rubber o-ring to hold the pin in place before these came i used the LAW-30.
The vzw-010 are an straight fit and needs no shiming prefer these over the LAW-30. Front driveshafts are LA232 65.5mm. Front using LA219.04
Since th VZW-010 came in a st of 4 i also mounted those in the rears.
Drive shaft in the rear are UM510.01 62.5 bones with LA231.02 axles
Rear hub is SP107H
Here is an over view so whats missing then front turnbuckles for steering and i have not mounted the shocks since i im missing some shock bushing for the LOSi shocks that i have decided to use. I have bought some Trinity shockbushings in alu so they are on theire way. Will replace the ball at the shock end with some kyosho dito due to the losi one is a bit to big and its easy to replace it. i have also mounted the good looking spidey battery bars that are shorter and fit the chassi.
hope you like it
mvh isobarik