Try this...
DRRS - 9 (but only if you have good LiPo, otherwise 7)
Boost - 45
Rate - 400rpm/deg
Start rpm - 3000
Turbo - 20
Ramp - 24
Delay - 0.2 (that's for Ardent with a big sweeper, 0.1 for a short straight)
Overheat Protection - On
Everything else to suit your radio and driving style. If you get a big 'switch' on the turbo down the straight, up the Boost to 50 and reduce the Turbo to 15. If the motor runs hot, change the RPM rate to 450 or more. If you need more punch, and the motor is acceptable on heat, then change the RPM rate to 350.
You don't say which 10.5 motor you are using, so check back for a suggested ratio. Mine's a GM (latest version) on 47mm/rev. HTH
