Quote:
Originally Posted by Chequered Flag Racing
|
Quote:
Originally Posted by baD
The following rules will be applied at all NE Regioanls
Re holes in shell - section rule 23.14 applies - you can tape over them.
23.14. Body shell holes/vents: The front and rear ends of the shell must retain some of the
original profile of the two ends of the shell. Front and rear facing areas within the body shell
surface which are 'marked' with the intention of removal to form ”air scoops/ vents“ are allowed
to be removed, within a maximum dimension of 10mm in any direction regardless of the manufacturers marking. If no ”marked“ air scoops/vents are designed in the original mould to assist airflow to the motor or ESC, then material may be removed to a maximum of 10 mm. in any direction within a maximum square area of developed size 30 mm x 30 mm, in two places
only. Windows are not allowed to be removed or include holes, other than for the purpose of the antenna.
Lipo's - must be charged in sac - Sac is any advertised and sold for this purpose and obtained from a known UK source or EU distributor as they then take on the 'product liability'.
Charging cells - power supply
Just the same for all other outdoor regionals this year, competitors will be able to charge cells from their own 1:1 car battery in situ - again if a Lipo sac is not used then the charging will need to take place quite some distance away (down the driveway) so that no other people are around. Please inform the Race Director if this is the case.
|
thanks for that, Will get the hole taped up !!!
Ive got a 20cm long 2s balance lead on order from good old FLEABAY which sholud let me put saddles in a lipo sack which ive just also put an order in for, and since i can pop the bonnet and use my 1:1 car battery then that will do me
