Hey Eric, I'm glad you've tried this mod
Note for all those keen to do this you need the longer battery strap as well. You can use the standard body it looks a little funny at the front like a tall guy waring short pants
but it works well and you can just cut a new body a little longer and its perfect!!
My starting setup is;
Front
Outside on arm and middle on the tower. Losi 35wt oil with purple (soft) spring or the kit black.
Short front camber link so inside on the bulkhead and the castor block with a 1mm spacer under the ballstud (Bulkhead).
Rear
Inside on arm middle on tower. Losi 30wt oil with red (medium) spring or kit black.
Medium camber link so inside/top on the bulkhead and the middle of the rear hub (Alum upgrade) with a 2mm spacer under the ballstud. If using the kit plastic rear hub then outside and top is similar.
I have the battery in the middle so even spacers either side of battery, I run the wing in the high position on the tower.