View Single Post
  #6  
Old 25-04-2011
chuckie stella's Avatar
chuckie stella chuckie stella is offline
Senior Member
 
Join Date: Sep 2009
Location: Northampton
Posts: 865
Default Southport setup (dry-high grip)

Here is my setup for Southport that I used this weekend.

Front
35wt Oil (associated)
Piston 2c
Orange spring #55
Outside hole on wishbone
Middle on Tower
Wide Track
Inner link position - middle with 2 washers
Outer link - long
Pivot block spacers - None
Kick up - 30 degree


Rear
27.5wt oil (Losi)
Piston 3a
Blue Spring #68
New Inside hole on wishbone (drilled one hole in from original postion)
3rd hole out on tower
Wheelbase - long on hub, short inner
Camber link inner - lower, outer hole
Camber link hub - (0 deg alloy hub) inner hole (shortest-alloy)
Roll bar - none

Tyres - Yellow Mini Spikes rear and staggers front (old style, no foam)
Inserts - Answer RC medium rears

Rudebits under speedo weight - 92g
Rudebits under lipo weight - 62g
Wing - Team Xtreme
Vega steering link - to decrease ackerman and increase overall lock (available now I think).

Motor - ORCA RX2 7.5 geared 25/kit spur
Speedo - ORCA Vritra VCT pro
Lipo - ORCA 5200 45C saddle
Servo - Spektrum S6040
Receiver - KO KR302f

Cheers, Matt
__________________
Absima - InsideLineRacing - Puppy Paint
Reply With Quote