[andy reeves]

My X2C starting set up.

Front

Kit pistons 25wt losi oil, silver assocated springs.
Middle on tower and inner on wishbone.
Camber link outer at wheel and inner on tower raised 1-2mm depending on how quick you want it to turn in.
Camber 1 degree

Rear

Kit pistons 20wt losi oil, silver assocated springs
Middle on tower and inner on wishbones
Camber link outer upper on hub and lower position on tower.
Camber 1 degree
Weight minimum 100g under the lipo.

Make sure the servo saver is locked up ( mine is glued)

If you have just got the kit with no hot ups then this is definatly the set up I would suggest. Car was quick enough to place mid B at the last round of the mid west regionals.