thought i would start a new thread on the trf502 to discuss and post your setups here.
jimmy any chance you could make this a sticky?
my first outdoor run was a bit of a baptism of fire as it was at the stotfold national
my basic setup was:
shocks front:35wt losi oil
yellow trf spring
tower hole no 2/wishbone middle hole
rear:30wt losi oil
red trf spring
tower hole no 2/wishbone middle hole
cells in rear position wide setting
wheelbase 1mm spacer front and rear on inside of rear wishbone.
1mm spacer front of rear hub.
i'll try and scan my setup sheet but i'm not promising anything as i'm crap with computers
hopups or extras:
0.5% rear ali hubs
jt models ali steering brace ran in the forward position.
1 and 1/2 coils cut off the rear springs.
i ran a 1mm spacer under the front camber link inner ball.