Quote:
Originally Posted by Kecky
Has anyone noticed a lot of front camber change under load?
I'm currently running the setup out of the manual (camber link on #1 (inner hole) on tower with 2mm spacers and 0mm spacers on the caster block) with 1 degree negative camber, to gain a base platform to build from.
Is this something common to this setup?
|
I originally ran the car as kit with the spacers on the castor blocks and it did oversteer quite a bit (particularly mid-corner). Try using the 2mm spacers on the tower- this did make the car more balanced. Also use 3mm spacers on the rear outboard.