You may need to calibrate your transmitter, below is the instructions taken from my manual.
1. Turn on transmitter
2. while turning on the vehicle, press and hold the setup button ( this is on the switch), notice the yellow led is now on solid. when yellow led is on solid you can release the switch.
3. using the throttle trigger pull full throttle until green led is on solid.
4. next push the throttle trigger to full brake until the red led is on solid.
5. now return throttle to neutral position and the blue led is on solid.
6. turn off the vehicle/esc power switch.
7. turn back on, you are now ready to use.
hope this helps
|