Quote:
Originally Posted by DaveG28
What spacers are you guys running on the rear shocks on the tower, on pictures it looks like the rear shocks are vertical, but having built mine even with no spacers they are leaned back at the the top, no badly though, probably at a similar angle to the anti squat?
Also, wheelbase, on the rear inner hingepin I only have 0.3mm play, very little and much less than Tamiya kit, are you guys finding the same (that wheelbase needs adjusting on the outers?)?
I am using Ali front and rear suspension blocks on the back by the way...
|
Hi Dave, i've thought about spacing the shocks away from the tower as i'm not entirely happy with the "leaning" but i'm not sure whether it will make any difference at all so i've not tried it yet, i'm just using the standard TRF spacing.
On the wheelbase i've dremelled away the rear raised section of the wishbone and inserted a TRF blue 2mm spacer at the front of the wishbone to effectively lengthen the wheelbase. I also found that dremelling the hub end of the wishbone (evenly) gives enough space to insert a 1mm plastic spacer so you can space it back and forward as necessary. If this isn't clear come and have a look on Friday and it only takes a couple of minutes to sort.
