My updated setup for Taplow as I ran the car on Friday night.
Front:
Stock pistons/27.5W/Blue spring
Shock mounting on tower middle and wishbone middle holes
Camber link 1-A, no spacers
Camber -1.5
Toe 0
Narrow Yellow Mini pins with 2 outside rows cut off, green stubby inserts (big one cut in half)
Rear
Short wheelbase
Stock pistons/27.5W/Orange spring
Shock mounting on tower middle and wishbone inner holes
Camber link 2-C, 2mm spacers by the tower and 3mm by the rear hub
Camber -2
Toe 3 HRC block
Anti squat 3 degrees
Yellow Mini pins, green stubby inserts
Mid motor configuration
Wing standard
50g weight on the rear
74gr weight under the short lipo
Novak Ballistic 6.5 with 19t pinion and stock spur
Ride height wishbones level
Servo: Spektrum 6070
Sanwa 2.4ghz rx
Notes: Car was well balanced and consistent. Good drive out of the corners and better on power steering. Want to try a 3.5HRC block next and the shocks still need rebuilding due to O ring stiction.
|