Happy to share set-up info.
Answers.
1.3 pistons, well this is what the manual says, I run them as kit standard, Alec has drilled his with a 1.3 drill bit. Same for the 1.4 pistons, I use mine as kit standard and Alec drilled his with a 1.4 drill bit.
Yes Tamiya springs.
On the front shock tower say 1 to 4, 1 being closest to the middle and 4 being the furthest away from the middle we are on #3
Im either on red or yellow rear springs, I didnt build my car cause Im lazy and the colour has worn off the spring, but what ever was in the kit is on the car.
yes starting from the inside on the rear turnbuckle ball stud.
The toe in block is the right way up.
Ride height is wishbones level front and rear.
|