Friday at Taplow was the first time I ran my 22 and my setup is not yet 100% dialed so take from it what you will. Shortening the wheelbase made a big improvement for that track. The rear was still stepping out a bit in the corners (possibly due to the 4.5 degree rear toe in). Good steering generally but would very much like a bit of more on power steering.
Mid motor
Front:
Stock pistons/27.5W/Green spring
Shock mounting on tower middle and wishbone middle holes
Camber link 1-A, no spacers
Camber -2 (will try -1 to -1.5 next time)
Toe 0
Narrow Yellow Mini pins with 2 outside rows cut off
Rear
Short wheelbase
Stock pistons/27.5W/Orange spring
Shock mounting on tower middle and wishbone inner holes
Camber link 2-C, 2mm spacers by the tower and 3mm by the rear hub
Camber -2
Toe 4.5 HRC block (will go down to 3 degrees I recon or maybe 3.5)
Anti squat 3 degrees
Yellow Mini pins
50g weight on the rear
74gr weight under the short lipo
Novak Ballistic 6.5 with 19t pinion and stock spur
Ride height wishbones level
|