To start with they will be just the individual sizes in packets.
They come in a choice of four colours (Tamiya Light Blue, Red, Purple and Black), they are available in M3 Button Head or M3 Countersunk Flat Head and come in the following sizes - 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm and 20mm. Each screw has a 2mm allen driver head, so one driver can potentially build a whole car with these.
Bare in mind also these are made of steel and not the less durable sluminium as usually seen on coloured screws.
Now the best bit, they are packed in bags of 6 and the UK RRP is just £2.19 per packet!! The cheapest "cool" looking bling money can buy.....
Hiro Seiho will be monitoring how succesful they are and looking at doing complete car screw sets possibly in the future
Hiro Seiko also have coming at the same time some alloy anodiesed spacer sets for ballstuds and general spacing etc. They will be coming in a choice of seven colours (Red, Titanium, Tamiya Light Blue, Yokomo Dark Blue, Purple, Black and Orange), each pack will have three sizes of spacer (2 of each) and there will be three packets to choose from - 1. 0.5mm/0.75mm/1.0mm, 2. 1.5mm/2.0mm/2.5mm, 3. 3.0mm/4.0mm/5.0mm.
The spacers will be here at the same time as the coloured screws (next week some time) and these have an RRP of just £1.99 per packet too
All of the Hiro Seiko range is available through any of the X-Factory UK dealers shown on our website -
www.xfactoryrc.co.uk