Quote:
Originally Posted by pugboy
I never noticed any reference to the flat kick shim in the manual, mine was built with 20 degree and tapered spacer, then I swapped to the 25 degree, still with tapered shim. Is this wrong? I have 2mm spacer on the hub and no bump steer.
|
When you say swapped to 25 degree still with tapered shim? The 25 degree shim is the flat shim, so I'm not sure what you mean?
If you've now got the 25 degree (flat shim) then from what Gnarly says you are right to have the 2mm spacer and should have no bump steer.
If you still have the 20 degree (tapered shim, as per manual) then you should remove the 2mm spacer to get no bump steer.