Quote:
Originally Posted by captainlip
my gearbox is also shimmed per manual, and has no movement left to right, i believe (thanks to bozz) the issue is with the input gear 14t moving in and out, if its shimmed inwards i can see there should be no meshing problems.
my durango diffs should be made of gold the amout ive spent on them. if durango dont supply shims for this then its their fault and should take responsibility as they should have extensively tested this.
|
They do not need shims, on the input shaft, there should be no play. Simply take any play out by moving the cvd in or out and locking the grub screw.
So what experience do you have on building and meshing gear diffs?