BC belt skip?
Hey folks,
Running a Mr-4bc with a 4300kv novak in it.
84/23 gearing (but that does not seem to matter)
No slipper - stock drive train.
IF I punch the throttle I get a dull crunching sound which I think is the belt teeth skipping over the drive gear.
IF I roll on, I can still go full throttle .. but no crunch.
Starting from a standing tone start, I get it, if I dont punch I am getting hammered by the guy behind me..
I have installed an extra tensioner further up the top deck, but I think this is an issue right at the centre drive gear.
Anyone have a suggestion besides .. dont punch it?
OH I can PUNCH the throttle when the car is already rolling.
James
|