Quote:
Originally Posted by Lazer zx-r
took the time today. and made som mesurements of the HB rim VS W5027 (original)
Specs.
Hotbodies : with : 38mm offset: 9mm
KyoW5027: with : 35mm offset: 6,5mm
this means mounted the W5027 have 5mm wider trackwith mesured at the center of rim to center of rim.
And since the HB rim is wider in total 3mm the trackwith from outside to outside of the rim gives the W5027 a 2mm wider trackwith.
So actualy if i use the HB rims the rear will be a fraction norrower than it is with the original ones.
|
Personally i believe the best solution is the zx-5 original not FS rear hubs or the 2wd rear hubs are a better solution.