Quote:
Originally Posted by ianjoyner
Anyone find the front spindle carrier binds slightly on the hinge screws, and the suspension isn't quite free? The inside of the wishbone is free, but the outside just binds slightly, so it won't drop under it's own weight. The rear is great very little play and free.
|
Yup - I found that also. I put it down to the black coating on the king pin screws - but also, like Reg has said, you could carefully open up the holes a smidge.
I ended up taking the coating off the screws with a piece of 600grit wet'n'dry - just so they'd drop a bit easier under their own weight.