Quote:
Originally Posted by moth898
I forgot to post pictures of the lipo saddles I installed in your zx-r chassis design. I simply cut lipo locator holes into the chassis and used schumacher body posts in the stock locations and it turned out perfect. I used a nosram saddle pack, perfect fit.
|
Yes i know but i fancied doing the design for my chassis and with another design change with fibre lyte will fit the standard chassis to. Ive based the design on having zeppin brass cell hole plates, the trf511 based lipo sides on the outside of the chassis bolt ontop of the brass sides and the plate in the middle of the chassis has been milled at the bottom so its flush with the brass so it keeps them in even without cells. Ive also added two holes to the centre so it can be drilled to the chassis and if any extra weight is needed it can be bolted directly onto it, and as its centred in the chassis will mean the car will be balanced. Soon will be getting it and posting pics.