Quote:
Originally Posted by DCM
Not sure about pinion mate, but the rest I can do
Dual Mode
Neutral Width - 8
Brake Strength - 100
Min Brake - 10
Min Throttle - 0
Throttle Profile - 3
Timing - 80
start/end rpm - default
Limiter - 85-90
Reverse Strength - 0
Gearing depends on the track, I am on between 9.4 to 9.8:1
|
Settings worked fine but with 42's & 6.5 X12 on 23/87 it went soft. Managed to get all the temp lights on
. Checked the motor and it had a 2 dot insert in. Swaped motor to a 7.5 with 4 dot insert and the esc temp'd out at about 60% on the lights.