Quote:
Originally Posted by QuackingPlums
50mm carpet tape that can do two wheels at once if you place them with the faces together (raised edges on the outside). Then just run a scalpel/craft knife between the two and you have two wheels taped and ready for foams.
|
Top Tip there Quacking Plums
Quote:
Originally Posted by QuackingPlums
What is the benefit of using motor spray? Does it soften the foam? I have so far only used washing up liquid which again works fine, albeit I have to dry out the tyres in the sun/in front of a heater before truing them.
|
Motor Spray or similar makes the adhesive/glue slippy so you can slide the foam onto the rim with ease. It evaporates and then the glue resets. You could spray the rim but I chose the foam as it soaks in a little giving a liitle more time to adjust the foam on the rim before the glue resets.