Quote:
Originally Posted by SHY
I've never ever had good results with any window masks. Never fits 100%, and you get bleed.
What to do: Draw lines with an overhead projector pen on the outside. Use a brush (don't need to airbrush) and put on 2x thick coats of Bob Dively Liquid Mask. Cut along the pen line with a sharp Excel knife. Peel of the excess. Paint. >> Perfect  Not to forget you can then also make your own "custom" windows! |
I've never had them bleed, they are a challenge to stick on in the exact right spot though..
Only problem with liquid mask + knife is if you cut into the polycarbonate you weaken it, so it might crack later.
I usually just cut thin strips of electrical tape and run it along the edge, it's easy to bend around curves