Hi,
I'm very sorry to hear about your problems.
I have two MM pro's and I have not had a single issue or problem.
Lets go back to basics now.
Calibrate the Mamba max pro on the table and out of the car,
without a servo or motor connected,
just the battery,receiver and the MMP.
Next.
switch off and disconnect the battery,switch off the transmitter.
Next.
Connect the motor and then connect the battery and switch on the transmitter.
Next.
Switch on the MMP.
Next.
Test the motor works.
(throttle on/brake/neutral).
Try that just so you can rule out everything else.
|