Finally found some time to build my 2011 Avante.... found some minor differences not mentioned in Tamiya official description between the rere Avante and the original Avante
will try to list them as i go along with my build....
And now on to the pics...
1st step of the instruction is to build the rear gearbox and motor, and this is the 1st minor differences
The motor plate for the 2011 is different from the original 1988
next up... is the lower and upper deck... which also have some minor differences
rear gearbox with motor attached to lower deck
Front gearbox attached to the lower deck
Installation of rear arm rod (i uses a aftermarket part by Pargu for the E3)
The installation of the rear arm rod is also slightly different from the original
Installation of upper deck
Rear Shock Tower installation
Rear Shock Tower attached to upper deck
Thats all for now... will post some more pics as i go along...
btw... the plastic for the rere seems to be of better plastic material than the original
1 complain i have is some of the screws parts bags are not label... Tamiya onli had label for bag A~F, another 3 bags of screws/misc parts were not label
anyway... welcome all comments... thanks