set up:
ESC:
Cont. Current: 18A
Burst Current: 50A
Resistance: 0.001ohm
Car Size: 1/16
Suggested Motor: Around 12T / 2030kv
Battery: 2 Cell Lipo / 4-6 Cell Ni-XX
BEC: 6V/ 1.0A Output
Motor Type: Sensorless Brushless
Size: 31.5*24*15mm
Weight: 19g
http://www.hobbyking.com/hobbyking/s...idProduct=7189
Motor:
Motor Size: 3674
RPM/V: 1660kv
Voltage: 2~6s (7.4v ~ 22.2v)
Max Volts: 22.2v (2~6s)
Max Load: 60A
Max Power: 1600watts
Resistance: 0.0158
Pole: 2
Diameter: 36mm
Front Mounting Hole Distance: 25mm
Front Mount Thread Size: M3.0
Shaft Diameter: 5mm
Shaft Length: 16mm
Can Size: 540
Plug type: 4mm Bullet-connector
Weight: 364g
http://www.hobbyking.com/hobbyking/s...dProduct=15234
Lipo :
Minimum Capacity: 5000mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 282g
Pack Size: 148 x 49 x 16mm
Charge Plug: JST-XH
http://www.hobbyking.com/hobbyking/s...dProduct=10365
Is dit goed?