Quote:
Originally Posted by nicefrog
My little motor is getting waaay hot pushing this thing around, hot enough that if you drop water on the motor it will instantly boil :P, you can burn yourself even on the chassis, I'm amazed it hasn't melted or drooped from the heat, so I'm going to need a more grunty motor pretty soon I think
|
You need better air flow to the motor, try this.
1. Drill 5 x 6mm holes in the chassis under where the motor sits.
2. cut a little bit more of the body at the front to allow air inside the car.
3. put 3 x 4mm holes in the body above the motor to dispurse the air out.