Quote:
Originally Posted by lynx75
Hi Richard,
thanks for your setup.
I would like ask you to post, if possible, the setup for the B4.1 on a astroturf.
The indoor track where I'll have races is created on a tennis area and the astroturf is slightly filled with some sands/gravel.
Do you have one to share with us, please?
During the last club racing some people was using the oil density very high, around 40wt/42.5wt. Why so high, please?
When I have a look on your setups the oil density is always around the range 25wt to 35wt.
I look forward to hearing news from you. 
Thank you,
Marco. |
Hi Marco
I normally run pretty much the same setup on my cars on most tracks, my starting astro setup is just like the Chadderton setup I posted above but with 2 washers under the front inner camberlink ballstud and the rear shocks in the middle on the tower - other than those little tweaks it's the same.
It's only on unusual tracks (like the Petit) I make any major changes - in the case of the Petit track my car was exactly as the setup Paul's just posted