Hi you can try this setup from a Spanish racer called prorace. He run this setup at II international much more endurance series in Avila.
Front:
Losi 40wt oil
Blue spring stock Piston
outside on arm and middle on tower
ballstuds outer on hub with and inside on bulkhead
-1 º camber
30 ° Aluminum hub
Rear
Oil 35WT Losi
Blue spring
Kyosho Piston 3B
-1 º camber
Alu stub +1 st backwards (toe in 2º)
outside on arm and inside on tower
ballstuds outer on hub with 2mm shims and inside upper on bulkhead
In addition, under the servo had 30g
Graupner Motor 9.5T
Ebay Battery 25C 5200 :-)
21T pinion 80T crown
Sorry for my bad english
|