Quote:
Originally Posted by DaveG28
Oooohhhhh????? Am I meant to already know!?
For anyone who's built it, just want to check I haven't wrecked elgearboxo!! Can't use the plastic slipper shaft spacer as the gearbox is thinner, so I shunned about 0.6mm at the far end the move the whole assembly out, then used a 0.5mm spacer to stop the float in the shaft, does that sound about right??
|
When i built the proto i used no spacers at all on the layshaft, a tiny bit of movement is not a bad thing. Btw remember to threadlock the screws that go into the motorplate.