Quote:
Originally Posted by dpackster1980
Mark you are so wrong please refer to link below, back of the net! 
www.manoonpong.com/Other/main_page=page_2.pdf
I'd suggest you look things up in future instead of advising people on how to torch their house or shed. 
With a low self discharge rate (please refer to link) it is enough to over charge a cell in a pack, even though they are matched at the factory due to manufacturing you can't guarantee over time that one cell may discharge more than another.
So when you do not balance them you will over charge one cell. KAPOOOW! |
if you read my post i put its advisable! you do not need to ballance every time, i have never balance two of my packs as a trial for track tech and there still as near as when they were new.
i dont need to look it up cheers, i have been told by those in the know!
the very low discharge rate is very unlikley to effect packs, UNLESS they are left for an extended period of time, you will see more inballance of lower quality cells.
we dont balance them to when were discharging them in the cars by running them, the voltage cut off do not work on each cell, so ill let you tell all how you stop one cell going to 2.5 volts and one to 3.5 with a speedo cut off of 6 volts!
see what google brings you now
