View Single Post
  #1  
Old 01-01-2011
eamo1978 eamo1978 is offline
Member
 
Join Date: Aug 2010
Posts: 289
Default Hong nor x2 nitro buggy and accessories

Hi ive decided to sell my beloved well looked after hong nor x2 buggy which i built myself from kit form. Im selling due to looking after my daughter full time and not having the time for a nitro model (im after an electric one eighth more plug n play for me). Here are the pictures first.








I bought the buggy in the summer of this year for 229 from je spares it should have been 350 pounds but was on offer. The go.28 engine was 75 pounds and has genuinely seen less than a gallon of optifuel 25% and the jp pipe and manifold cost me 35 pounds plus enclosed wheel nuts 10 pounds and 1200mah rx battery pack 10 pounds. On top of this it also has a ko propo digital fet 2144 14kg servo for steering and a power hd 12kg for the throttle/brake. It must be the nicest put together model ive ever owned it is SOLID there are no e-clips on it everything is held with nylock nuts so nothing will come loose. The go engine was broken in over ten tanks and has always been run with a good trail of smoke from the pipe, the buggy is ballistic with this engine as jaykorty or mixmasterjay will vouch for me. All in all its a beautiful rc to drive and own and even when going over jumps it stays perfectly level thru the air.
Its a shame to sell it but its just not getting used enough. Im asking 250 posted.
King starter box wanting 45 posted comes with glowstarter lead and 12v lead acid battery.
Glow-starters 6 each posted.
25% Fuel 10 collected from rotherham.