B4 to B4.1
Hi Guys, I have given my B4FT a bit of a freshen up and got it to as close as B4.1 as I can, and it has not cost too much either!
These are the parts I have used:
AS9612- Steel front Axles £6.99
AS7485- V2 Slipper Pads £12.50
AS7486- V2 Slipper Spring £1.99
AS7487- Rear B4.1 hinge pin blocks £5.99
I also added a Trish Bits front bulk head too.
Then I wanted to upgrade to the V2 shocks, rather than pay out £40 a pair I ordered up the shock bodies and shafts etc to make them into V2's. They have gone together really nicely and are so much easier to bleed etc than the kit B4 shocks.
I used the following:
AS6433 - Bleeder Shock caps
AS1777 - B44 shock ends
AS9723 - 0.80 front shafts for more droop same as B4.1
AS7475 - Front Shock Bodys V2
AS7479 - Rear Shock Bodys V2
The only parts I am waiting on is the Crystal Clear Gear cover and have ordered the AS9865 0.5 deg rear FT Hubs. Thanks to CML and MK Racing for the parts.
Pics to follow.
|