The rear shocks do lean back but only a little, maybe a spacer between the shock end and wishbone to space it out a bit could be used... Yes, i just used an imperial screw for the shock bottoms, doesnt seem loose so no problems there...
I havent got the rear drive shafts for AE wheels, ive just used 4, .03 washers to space out the drive shaft from the hub, taken the hex off and use the standard drive pin with AE/Losi wheel...
On the front i drilled out a B4 steering block to 3mm so i could use it with this car and AE front wheels as ive got plenty of them lying around...
This cars a good build and a very good price! Cant wait to see how it handles
